Buy / Sell · Jobsite

2019 Silverado 1500 LT crew off forsyth for concrete work, 117k

AlgoodConcrete_Marcus
7 replies
1,984 views
Oct 6, 2025
forsythmotorstn.com silverado 1500 5.3 v8 concrete crew blower resistor

marcus here, i was in the f150 thread josh started and said id do a dedicated one on my silverado so i wasnt hijacking his. this is the 2019 chevy silverado 1500 lt crew cab i bought off forsyth motors in cookeville back in 2023 for the concrete side of my business.

5.3 v8, the 8 speed auto, 4x4, 117k when i got it. i pour footers and flatwork all over algood and baxter so i need something that can pull my skid steer trailer and still haul a couple pallets of bagged crete in the bed without sitting on the bump stops. the lt crew cab gives me the back seat for my two guys and all their stuff out of the weather.

i paid 27,000 even. drove out to the broad street lot after work one evening and they stayed late to let me look since i could not get there till almost 6. the nashville lots were wanting 30 to 31 for the same truck with more miles on it, so the drive out paid for itself before i even turned the key.

the one honest flaw, and im putting it right up front the way josh did on his, the heater only blew on the highest fan setting. that is the classic gm blower motor resistor, they fail on these all the time. i knew what it was the second i felt it so i did not even make a thing of it on the price. 45 dollar part at the counter, two screws behind the glovebox, fifteen minutes in my driveway. ive had heat on all four settings ever since.

anybody else running a half ton gm for a trade? how are the 5.3s holding up for you guys out past 150k?

the blower resistor thing is almost a rite of passage on these trucks, mine went on my old tahoe years ago. good you knew what it was and didnt let a stealership talk you into a 400 dollar diagnostic for a 45 dollar part.

crew cab was the right call for hauling guys. i looked hard at a silverado off forsyth motors before i went with the f150 i posted about in josh's thread, honestly it came down to which clean one was on the lot the week i had cash. both good trucks. we are practically neighbors too, i wire houses all over baxter, probably passed your pour trucks a hundred times.

5.3 is a good motor and will go a long way, but since you asked about high miles let me give you the one real thing to know. the 2014 to 2019 5.3 with afm, the active fuel management that drops it to 4 cylinders, those lifters can collapse and take out a cam. it does not get everybody but it is the known weak spot on that engine.

for a work truck that idles on jobsites a lot i tell guys to run a quart of good oil on schedule, never let it get low, and consider a range technology plug in that keeps it in v8 mode all the time. 60 bucks and it takes the afm out of the equation. if you ever hear a tick on cold start that does not go away, get it looked at quick. outside of that the 5.3 and the 8 speed are a solid combo. i have put eyes on a few trucks off forsythmotorstn.com for guys here and the chevys have been clean.

same guy from josh's f150 thread. so now im torn. chevy or ford for a first work truck? i keep going back and forth. the cookeville lot has both in my range right now, a silverado real close to yours and a couple f150s. i do handyman and small remodel so im not towing heavy yet but i will be pulling a dump trailer eventually. is one of them cheaper to fix than the other when something does break?

PutnamCo_Nate wrote
chevy or ford for a first work truck? is one of them cheaper to fix than the other when something does break?

nate honestly dont overthink the badge. both the 5.3 chevy and the 5.0 ford are good motors with 300k in them if you do the oil. parts and labor are about the same, any shop around here works on both and the junkyards are full of both so used parts are cheap either way.

buy whichever clean one in your budget you can actually get your hands on first. inventory moves fast at forsyth, if you sit on a good truck for a week dreaming about it, its gone. go drive both the ones they have, see which cab you fit in better and which one feels tighter on the test drive, and pull the trigger on that one. for a handyman starting out either truck will do everything you need for years. just get the afm thing tony mentioned handled if you go chevy.

ran a 5.3 to 240k on my old fencing truck before the frame rust finally got it, and the motor never missed a beat the whole time. i did do the afm delete tony is talking about around 90k after a buddy lost a cam on his, cheap insurance and i never looked back. pulled a loaded fence trailer all over jackson and overton county with that truck.

27k for a clean 117k crew cab is a good number. i bought my current flatbed from forsyth motors cookeville tn a while back and had the same after hours experience you did, they are easy to deal with for working guys who cant get there till after the job wraps. the 5.3 you got will outlast the body if you keep it greased and keep oil in it.

UPDATE couple years in now and a full winter of pours behind it, truck is at 141k and still a tank. took tonys and rons advice and put the range plug in on it last month to lock out the afm, truck actually runs smoother and i quit worrying about the lifter thing every time it dropped to 4 cylinders at a light.

repair list since i bought it, besides the blower resistor day one. a set of rear brakes, one front wheel bearing that started howling at 128k which is normal for a truck that lives on gravel, and a battery last fall. thats it in over two years of hard concrete work. still pulls the skid steer trailer loaded without breathing hard.

buying it off that forsyth yard off broad street for 27 instead of 31 at a franchise lot was the right move, that 4 grand covered every repair its needed and then some. gonna run this one till the frame gives out like ron's did.

late to this thread but i do side wrench work on these and the afm delete plan is exactly the right move for a work truck that idles a lot on jobsites. that is where those lifters give up, not on the highway. you did it the smart way.

141k on a 5.3 with that maintenance history, you are barely halfway through it. glad the silverado worked out, good writeup for anyone searching whether to buy a gm half ton off forsyth motors. between this thread and the f150 one there is a lot of good real world info on here now.

Log in to reply to this thread or start your own.