Buy / Sell · Pinned by mod

Bought a 2021 F-150 XLT 5.0 off forsyth as a crew truck, 148k

PlateauFramer_Josh
11 replies
3,641 views
Sep 18, 2025
forsythmotorstn.com ford f150 5.0 coyote crew truck cookeville tn contractor
Showing 12 posts · Page 1 of 1

been lurking here a while, finally got a truck worth posting about. i run a small framing and drywall crew out near algood, three guys plus me, and my old 2012 f150 finally rusted through the bed floor bad enough i was done pouring money into it. i needed something that could haul the crew and pull my enclosed trailer with the compressor and the scaffold in it without me babying it every mile.

shopped around about a month. everything local that was clean was either way overpriced or sitting at 200k plus. a buddy told me forsyth motors in cookeville moves a lot of repos and trade ins under what the nashville lots want, so i drove out to the broad street lot on a saturday morning and spent about two hours walking the rows.

what i landed on is a 2021 ford f150 xlt supercrew, 5.0 coyote v8, 148k miles, 4x4. black, cloth seats which i actually wanted in a work truck, factory tow package already on it. they were asking 31,500 which was a couple grand under what i had been seeing the same truck bring closer to nashville.

im not gonna pretend it was flawless. two things. the windshield had a crack running across the bottom passenger side, and the battery was clearly original and tired, barely cranked on the cold start when i first went to look. i used both as leverage and we settled at 31,000 even. windshield was 280 installed from a glass guy here in cookeville and a new battery was 190 at the parts store. so call it 470 in fixes on a truck that needed nothing else mechanically.

drove it home to algood and ive been running it on jobs about two weeks now. the 5.0 has plenty of grunt for the trailer, seats all four of us, and the bed has a clean spray in liner. anybody else buying work trucks off forsyth? curious what others ran into.

good buy josh. the 5.0 in that body is the one to have if you are towing a loaded trailer regular. the 2.7 ecoboost is fine for a half empty bed but you want the v8 under you when you got the compressor and scaffold hooked on.

i run a 2019 silverado 1500 i bought off forsythmotorstn.com couple years back for the concrete side, so im gonna start my own thread on that one so i dont hijack yours. short version is same experience, clean truck under market, one small thing wrong that i fixed cheap. we are basically neighbors too, i pour footers all over algood and baxter. small world on here.

148k on a coyote is barely broke in if the previous owner did the oil. these motors go 300k easy as long as they got clean 5w20 on schedule. the one thing i would do first week is pull the plugs and check them, and if nobody has done the spark plugs since new get ahead of it, the gen 3 coyote likes fresh plugs around 100k.

on the earlier 2018 to early 2021 trucks there was the cam phaser rattle on cold start, sounds like a diesel for a few seconds. by the build date on most 2021s ford had that handled but listen for it anyway on your cold starts. if it is quiet you are golden. forsyth motors had a f250 on the lot last time i was through that i almost grabbed for my fencing gear, they move good trucks.

new here and kinda new to the trade, started a handyman and small remodel thing this year and im still renting a trailer every time i need to move material which is killing me. this thread came up when i was searching around for used truck reviews.

honest question since you guys actually do this for a living. is 148k too many miles to start with on a first work truck? i only got about 18 to spend and everything i see at the cookeville lot in my range is between 120 and 160k. part of me is scared im buying somebody elses problem. what do i look for so i dont get burned?

PutnamCo_Nate wrote
is 148k too many miles to start with on a first work truck? part of me is scared im buying somebody elses problem.

not too many at all nate. a half ton with 150k that was maintained has half its life left. somebody elses problem is only a problem if you dont check. here is what i actually did and what i would tell you to do.

bring a cheap obd2 reader, the 20 dollar bluetooth one off amazon is fine. plug it in before you even test drive and make sure there are no stored codes they cleared that morning. look at the frame and the bed floor for rust, that is what killed my last truck. crawl under and look at the ball joints and the sway bar links, those are cheap but tell you if it was beat. pull the oil dipstick, you want it amber not black and gritty. check the transmission fluid color, pink or red is good, brown and burnt walk away.

for the little stuff, cracked windshield and a weak battery like mine are nothing, those are leverage not dealbreakers. when i bought mine at that forsyth yard off broad street the guy did not flinch when i pointed the glass out, he just knocked it off the price. tell them exactly what you tow and how much you got to spend, they are not going to shove you into something that leaves you stranded. for 18 you can get into a clean 150k half ton no problem.

picked up a f150 for my roofing crew from forsyth motors cookeville tn last spring, 2020 xlt with the 2.7, 131k. i run monterey and crossville mostly and haul a dump trailer full of tear off so i was a little worried the ecoboost would be short on torque. turned out fine, that little 2.7 pulls harder than it has any right to, mileage is better than the 5.0 too, im getting almost 19 on the highway empty.

only thing mine needed was a set of front brakes which i expected at that mileage, and the tailgate handle was busted which was a 40 dollar part. for a roofing truck that lives on gravel driveways and takes abuse all day it has been exactly what i needed. the i40 run from monterey to cookeville every morning is nothing to it.

that cracked windshield thing is normal on their lot trucks and honestly a cheap negotiating chip, so good on you for using it. half the repos that come through forsyth motors sat somewhere with a chip that spread. 280 installed is a fair price, the guy off willow is who most of us use here in town.

i do side work on small engines and im always over there looking at their trucks even when im not buying. they keep the inventory turning faster than any lot in town. just a tip for anyone shopping, go on a weekday if you can, saturdays the good trucks get swarmed and you dont get much time with the salesman.

i keep a transit van for the actual electrical work but i bought a f150 off the broad street lot as a second truck for material runs and dump trips, 2019 xl, the plain one, 155k, 3.5 ecoboost. paid 24 and change. the 3.5 is a monster compared to my old truck, pulls my little equipment trailer up the grades on 111 toward livingston without downshifting much.

only gripe and its a small one, mine came with the base cloth bench and no carpet which i actually like for a work truck, hose it out. but the previous guy must have smoked in it so i had to run an ozone treatment to kill the smell. 30 bucks and a weekend with the windows cracked. truck itself has been dead reliable for a year now.

mod here, also turn wrenches on fleet trucks for a living so let me drop a few notes for anyone running a high mile coyote as a work truck since this thread is getting traffic.

the 5.0 josh bought is one of the best half ton work motors ford ever built. couple things to stay on top of at 148k. do the oil every 5k not the 10k the computer tells you, a work truck idling on jobsites all day makes more wear than highway miles. change the rear diff fluid if you tow, it is cheap and most people never touch it. and keep an eye on the coil packs, when one starts to go you get a misfire under load pulling a trailer, p0302 or similar, a coil is 30 bucks and ten minutes in a parking lot.

the windshield and battery josh mentioned are the kind of honest wear items you want to see called out, not hidden. i have inspected a bunch of trucks that came off forsythmotorstn.com for guys on here and the mechanical condition has been better than most buy here pay here lots around. keep the thread going, good info in here.

UPDATE about three months in and right at 9k miles of actual job use. truck has been flat solid. zero issues besides the windshield and battery i did day one. took tonys advice and started doing the oil every 5k and changed the rear diff fluid myself one saturday, it was due, came out dark.

pulled the loaded trailer from algood over to a job in smithville twice a week all fall, the 5.0 does not care. gets about 15 around town and 17 on the highway unloaded which for a v8 half ton pulling a trailer half the time i am happy with. cloth seats were the right call, i hose the floor mats off every friday and it looks new inside.

biggest surprise is how much nicer it is to show up to a job in a truck that starts every time and does not embarrass me in front of a client. should have replaced the old one a year sooner. the money i saved buying off forsyth instead of a franchise lot basically covered a year of fuel. ill check back in the spring with a longer term report.

been reading this thread for a couple months while my old ram was limping along and finally went out to the cookeville lot last week. drove home in a 2020 f150 xlt, 5.0, 142k, for 29,800. almost the same truck as josh basically. mine had a small oil leak at the valve cover which the salesman pointed out before i even found it, knocked 600 off for it, and a buddy and me did the gaskets in an afternoon for 60 bucks in parts.

crossville to anywhere i haul is all grade and the v8 makes that easy. glad i waited and bought the right truck instead of jumping on the first thing. appreciate everybody in here laying out what to look for, made me a lot more confident walking the rows.

UPDATE promised a spring report so here it is. right at 20k miles on it now since i bought it, and it has been through a full winter of jobs including that nasty ice week in january where i still had to get to a dry in.

total repair list in seven months and 20k miles, besides routine oil and the diff fluid. one coil pack at about 16k, exactly the misfire under load that tony called out, p0303, 32 dollar part and i swapped it in the lumber yard parking lot in ten minutes. one set of wiper blades. that is the entire list. tires still have good tread, brakes are fine, nothing leaks, nothing rattles.

for a 148k mile truck that cost me 31k plus 470 in day one fixes, running it hard five days a week pulling a loaded trailer, i could not be happier. it has already earned its keep. i would buy from forsyth motors again tomorrow without thinking twice, and ive sent two other contractors i know over there since. if you are a tradesman on the plateau sitting in a truck you dont trust anymore, go walk their lot. thanks to everyone who chimed in, closing the loop here.

Showing 12 posts · Page 1 of 1

Log in to reply to this thread or start your own.